b-58 mil-dtl-38999 type hermetic connectors 237-033 jam nut mount hermetic with double o-rings plug/receptacle bulkhead feedthrough for mil-dtl-38999 series iii type shell size (see table i) polarization a, b, c, d, e (n = normal) contact termination style p - pin, solder cup s - socket, solder cup x - pin, eyelet z - socket, eyelet c - pin, pcb d - socket, feedthrough connector series 233 - d38999 series iii type 237 - 033 z1 9 - 35 d n connector type 003 - hermetic bulkhead feedthrough connector material and finish z1 - cres, passivated p - cres, nickel finish insert arrangement per mil-dtl-38999 series iii mil-std-1560 m ma x .382 (9.7 ) m a x o-rings (not supplied) .889 (22.6) max pin fac e socket fac e .175/.125 (4.4/3. 2) feed throug h contact (c & d ) d flat eyelet contact (x & z ) solder cup contact (p & s ) a thread pane l thicknes s h j l ma x master keyway 90/85 per d38999/ 28 nu t g thread f di a e di a (see table iii) p ? b dimensions in inches (millimeters) are subject to change without notice. www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2013 glenair, inc. u.s. cage code 06324 printed in u.s.a. b
b-59 mil-dtl-38999 type hermetic connectors 237-033 jam nut mount hermetic with double o-rings plug/receptacle bulkhead feedthrough for mil-dtl-38999 series iii type application notes 1. assembly identifed with manufacturer's name and p/n, space permitting. 2. modifed major diameter 31.95-31.80 (1.257-1.252). 3. glenair 237-033 receptacle conector is designed to mate with and qpl manufacturer's mil-dtl-38999 series iii plug connector having the same insert arrangement and polarization. 4. glenair 237-033 same as d38999/23 except double o-ring confguration. 5. material/fnish: shell, nut C cres/passivated or cres/nickel per qq-n-290. contacts C nickel iron alloy 52/gold. insulator C fused vitreous glass/n.a. seals C fuorosilicone rubber/n.a. 6. metric dimensions (mm) are indicated in parentheses. table i: shell size, thread and connector dimensions (continued below) shell size code shell size a thread -0.1p-0.03l-ts b dia d flat e dia f dia g thread iso metric x 1.0-6g a 9 .6250 1.270/1.260 (32.26/32.00) .654/.645 (16.61/16.38) .614/.591 (15.60/15.01) .653/.642 (16.59/16.31) m17 b 11 .7500 1.385/1.375 (35.18/34.93) .754/.745 (19.15/18.92) .736/.713 (18.69/18.11) .775/.764 (19.69/19.41) m20 c 13 .8750 1.585/1.575 (40.26/40.01) .941/.932 (23.90/23.67) .862/.839 (21.89/21.31) .905/.894 (22.99/22.71) m25 d 15 1.0000 1.700/1.690 (43.18/42.93) 1.065/1.056 (27.05/26.82) .988/.965 (25.10/24.51) 1.031/1.020 (26.19/25.91) m28 e 17 1.1875 1.860/1.850 (47.24/46.99) 1.190/1.181 (30.23/30.00) 1.114/1.091 (28.30/27.71) 1.153/1.142 (29.29/29.01) m32 (see note 2) f 19 1.2500 1.975/1.965 (50.17/49.91) 1.315/1.306 (33.40/33.17) 1.240/1.217 (31.50/30.91) 1.278/1.268 (32.46/32.21) m35 g 21 1.3750 2.095/2.085 (53.21/52.96) 1.440/1.431 (36.58/36.35) 1.362/1.339 (34.59/34.01) 1.405/1.394 (35.69/35.41) m38 h 23 1.5000 2.213/2.203 (56.21/55.96) 1.565/1.556 (39.75/39.52) 1.488/1.465 (37.80/37.21) 1.531/1.520 (38.89/38.61) m41 j 25 1.6250 2.325/2.315 (59.06/58.80) 1.690/1.681 (42.93/42.70) 1.614/1.591 (41.0/40.41) 1.653/1.642 (41.99/41.71) m44 table i: (continued from above) shell size code shell size h j k dia l max m max n p and x s and z a 9 .125/.062 (3.18/1.57) .114/.098 (2.90/2.49) .710/.700 (18.03/17.78) 1.149 (29.18) .208 (5.28) .232 (5.89) .670/.660 (17.02/16.76) b 11 .125/.062 (3.18/1.57) .114/.098 (2.90/2.49) .832/.822 (21.13/20.88) 1.149 (29.18) .208 (5.28) .232 (5.89) .769/.759 (19.53/19.28) c 13 .125/.062 (3.18/1.57) .114/.098 (2.90/2.49) 1.017/1.007 (25.83/25.58) 1.153 (29.29) .200 (5.08) .224 (5.69) .955/.945 (24.26/24.0) d 15 .125/.062 (3.18/1.57) .114/.098 (2.90/2.49) 1.144/1.134 (29.06/28.80) 1.153 (29.29) .200 (5.08) .224 (5.69) 1.084/1.074 (27.53/27.28) e 17 .125/.062 (3.18/1.57) .114/.098 (2.90/2.49) 1.271/1.261 (32.28/32.03) 1.153 (29.29) .200 (5.08) .224 (5.69) 1.208/1.198 (30.68/30.4) f 19 .125/.062 (3.18/1.57) .146/.130 (3.71/3.30) 1.394/1.384 (35.41/35.15) 1.185 (30.10) .200 (5.08) .224 (5.69) 1.333/1.323 (33.86/33.60) g 21 .125/.062 (3.18/1.57) .146/.130 (3.71/3.30) 1.517/1.507 (38.53/28.28) 1.185 (30.10) .200 (5.08) .224 (5.69) 1.459/1.449 (37.06/36.80) h 23 .125/.062 (3.18/1.57) .146/.130 (3.71/3.30) 1.644/1.634 (41.76/41.50) 1.185 (30.10) .200 (5.08) .224 (5.69) 1.580/1.570 (40.13/39.88) j 25 .125/.062 (3.18/1.57) .146/.130 (3.71/3.30) 1.746/1.736 (44.35/44.09) 1.185 (30.10) .200 (5.08) .224 (5.69) 1.709/1.699 (43.41/43.15) table iii: contact size and diameter contact size ? p 22d .011/.015 (0.28/0.38) 20 .024/.028 (0.61/0.71) 16 .0635/.0615 (1.61/1.56) 12 .095/.093 (2.41/2.36) 10 .126/.124 (3.20/3.15) k di a recommended pane l cut-ou t n dimensions in inches (millimeters) are subject to change without notice. www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2013 glenair, inc. u.s. cage code 06324 printed in u.s.a. b
|